Formwork Accessories include tie rods, thruty sleeves, base plates, wing nuts, anchor nuts, thruty cones, water barriers, chamfers, and others.
UNITECH Waterstop (a high grade flexible polyvinyl chloride waterstop) is designed for use in any concrete structure which contains joints and is subjected to a hydrostatic load on one face of the structure. It prevents water movement through concrete joints in water reservoirs, canals, dams, sewage treatment plants, bridges, stadiums, basements, floor slabs, parking garages and similar structures.
DON QUICHOTTE concrete nails is the leader in nail fixing, high hardness and flexibility. manufactured from special high carbon steel.
BMI stands for an innovative manufacturing technology of levels, designed for strenuous work. BMI ensures a long working period and high precision for your tasks apart from an appealing optical design. BMI worldwide patented manufacturing processes ensure constant and consistent top quality.
A natural choice in designing, building and constructing works including roads and highways; ground, drainage and filtration systems; hydraulic works, waste disposal sites and water purifying plants.
Extruded Polystyrene rigid thermal insulation boards mainly used for insulating roofs, walls and floors from severe climate conditions. Insulation boards, manufactured according to ASTM C578, also help the prevention of ultraviolet rays from penetrating roofs, walls and floors.
Bituboard is manufactured from highly resilient softwood fibers coated with bitumen. It is dry and clean, and cannot extrude any form of staining matter and it is resistant to moisture penetration and ice formation in the joint. It is immune to dry and wet rot, fungus and most forms of insect attack or similar forms of deterioration.
POLIANE Polyethylene Rolls. A blown polyethylene film resistant to alkalis, salts, acids and chemicals found in sub-soils; fully stable and waterproof. It is an anti-corrosive and weather resistant blown polyethylene film.
Poly Board is a semi flexible polypropylene based board for waterproofing membrane protection. It is extremely strong in puncture and injury resistance. It differs from any other materials used to protect the waterproofing membrane as it enjoys flexibility which enables its use for tacking corners, protrusions, rounded surfaces, and also on uneven surfaces.
EEI Expanded Polystyrene is rigid and light - weighted. By controlling the density of expanding beads during the manufacturing process, EEI can custom produce insulation materials according to the specific requirements of customers applications.
Semi rigid expanded insulation cork boards are naturally dark in color and although designed for insulation purposes they do have multifunctional uses. The cork’s low thermal conductivity offers a high energy efficiency, thus contributing for an environmental and economic saving.
The solutions provided by this system, consisting of several elements which are carefully selected, contain all necessary parts and accessories for its proper execution and the system is tailored to each project’s specic requirements.
The Ellisus Roofyard system not only transforms your roof into a garden but is also a complete, efficient, and sustainable system for living roofs.
UNIPRO Rockwool Blanket conforming to ASTM C-553 and ASTM C-665 is a lightly bonded insulating material available with or without facing. These products can be faced on one side or both sides to form a firm but flexible multi-purpose insulating materials.
Premium, Gun grade B1 foam is a flame resistant, one component polyurethane foam curing by air moisture, applicable with standard foam guns. Gun grade B2 foam is one component polyurethane foam curing by air moisture, applicable with standard foam guns. Gun grade B3 foam is one component polyurethane foam, curing by air moisture, applicable with standard foam guns. Ideal, resilient insulation and filling material for building construction and industry.
One-component polyurethane thermal insulation “TriS” is designed for thermal and sound insulation of facades, loggias, verandas, mansards, attics, basements, pipelines and utility supply lines, and systems, isothermal wagons, vans and analogical vehicles, garage and warehouse gates, industrial buildings and structures.
This adhesive allows enhancing energy efficiency and reducing utility fees. It helps to perform secure and quick heat insulation of premises by mineral wool. This adhesive is easily applied to any type of surface, and it is cost-effective.
Premium quality foam with an increased yield of up to 65 liters of the final product. For the installation of stained-glass windows and door blocks, window sills, fastening wall panels, sealing gaps, voids, heat and noise insulation, as well as for other construction, decoration and installation works.
TREMproof 250GC is a rapid-curing, high-solids, VOC compliant modified polyurethane waterproofing membrane. It can be applied to damp and green concrete.
Mapelastic Smart is used to protect concrete structures, renders with hairline cracks and cementitious surfaces in general which, being subject to vibrations, may suffer from cracking, and for waterproofing hydraulic projects such as channels, faces of dams and swimming pools, basins, storage tanks, balconies and terraces. Particularly suitable for waterproofing irregular surfaces.
TREMproof® 60 is a single component, bitumen modified, moisture curing polyurethane fluid applied waterproofing membrane. It is used in the waterproofing of Roofs, Tunnels, Terraces, Balconies, Plaza Decks, Planter Boxes, Retaining Walls, Fountains and Pools.
BOLDEN WB is a brushable, water-based sulphate resistant bitumen coating. It is formed by the anionic emulsification of pliable bitumen and is both stable and easy to apply. It adheres to all types of surfaces and can also be diluted to become a penetrating priming coat for use on porous surfaces.
Premium, liquid-applied, highly permanent elastic, cold applied and cold curing, one component polyurethane membrane used for long-lasting waterproofing.
It is a pigmented, color- and UV-stable, highly permanent elastic, cold applied and cold curing, one component aliphatic polyurethane coating, used as a top-coat for protection over exposed, polyurethane waterproofing coatings.
Polyester, non-wooven Geotextile.
It is a transparent, rigid, deep penetrating, one component, quick drying polyurethane primer.
Liquid-applied, highly permanent elastic, cold applied and cold curing, water based, one component, modified polyurethane membrane used for long-lasting waterproofing.
POLY TI 7000 is a transparent, semi-rigid, deeppenetrating, one component polyurethane primer. Solvent based. Cures by reaction with ground and air moisture.
The POLY TI 7100 is a colored, one component, highly durable, heavy duty aromatic polyurethane floor coating. The POLY TI 7100 is specially designed for use as a thin-layer floor coating, providing high mechanical strength, high abrasion and chemical resistance. Cures by reaction with ground and air moisture.
The POLY TI 7200 is a colored, one component, highly durable, aliphatic polyurethane thin-layer floor coating. The POLY TI 7200 is specially designed for use as a floor coating in external surfaces, providing high mechanical strength, high abrasion and chemical resistance. It is color stable, UV-stable and weatherstable so it can withstand the battering of the elements when applied outside.
High impact UPVC conduits for protection and coating of electrical wires. Our electrical conduits and trunkings are available in a variety of sizes and fittings to suit most applications.
A complete range of cable ties & nylon plugs for all kinds of applications: cable ties for wiring and installation, identification cable ties, special cable ties, heat resistant cable ties, and a wide range of accessories for fixing cables and pipes on different kinds of materials. Elematic production conforms to European Standards, guarantees the application of severe quality parameters on all stages.
Thin wall heat shrinkable tubing in cross-linked polyolefin, self-extinguishing, flexible and strong, with chemical resistance and safety in the electrical insulation, suitable for general applications.
Poly TI is a high performance one-part polyurethane sealant elastomeric weather-resistant, non-sagging, and water tight with excellent adhesion properties designed for use in all types of joints, vertically and horizontally. Poly TI has a movement capability of ±25% of the joint width, making it ideal for joints.
STI leads the industry in developing innovative fire protection systems that help stop the spread of fire, smoke and hot gases. STI products and systems offer innovative firestop solutions for all types of new construction and retrofit applications.
Dymeric 240 is a multi-component high performance epoxidised polyurethane sealant which provides a durable, weather tight seal in dynamically moving joints. THC-900 & THC-901 are multi-component, high performance joint sealants which on thorough mixing, provide trafficable, durable seals in dynamically moving joints.
Extruded closed cell polyethylene foam which is both flexible and compressible. Backing Rods are designed as pre-molded joint fillers for expansion joints in civil engineering and building construction works of all types. They are also suitable for all types of cold applied sealants including silicones, polysulfides, acrylics, butyl rubbers, polyurethanes, general-purpose mastics, bitumen based sealants and putties.
Medium modulus acetoxy silicone sealant. This sealant is ready to use. After suitable joint preparation and masking, the sealant is gunned into place and tooled within 5 minutes, using a spatula which has been dipped in a soapy water. Masking tape is then removed immediately. Uncured material can be removed by using a suitable solvent or an approved sealant remover. Cured material may be removed by abrasion or other mechanical means.
Eagle Mastic (2-components polyester) is a synthetic resin-based adhesive with a specific weight between 1.1 and 1.65 gram/cm3.
Unifix 401 and 402 are premixed cement-based water resistant mortars for fixing ceramics and glass tiles on walls and floors, applied internally and externally on fair face concrete, bricks and blocks.
UniGrout 201 is a cement-based, polymer-modified tile grout mortar, for filling grout joints of ceramic wall and floor tiles, porcelain tiles, and mosaic tiles, for walls, floors, showrooms and swimming pools. It is applied internally and externally and where heavy traffic is present.
Eagle Seal Acrylic Sealant is mono-component, water based acrylic sealant and caulking compound for professional decorators. It is tough, elastic, odorless and provides a durable seal gives good waterproofing property after drying. It has excellent weather resistance, allowing it to be used outdoors.It is asbestos free, mildew and fungus resistant.
The PROJOLLY SQUARE, available in 18 colors with EAN BAR CODE, facilitates installation, eliminating the fragile ceramic trim. it is used for outside corners of tiles to complete the finish of wall coverings, decking, steps, bathtubs, etc. Impeccable, precise work is ensured with a superior aesthetic effect. It strengthens the tile edge, thereby preventing chipping and breakages.
Eagle Seal for Bath and Kitchen is a 100% one-component acetoxy cure, non-sag silicone sealant specially formulated nto resist mold and mildew when fully cured. Eagle Seal for Bath and Kitchen has excellent adhesion to ceramics, tile board, corian, arborite and most acrylics.
Eagle seal weather Sealant is a neutral curing one component silicone sealant that has excellent weather, ageing and UV resistance properties and is specially developed for the weather sealing of structural glazing, angled glazing, wood-glass composite units, roof glazing and conservatories.
The POLY JOINT 30 is a thixotropic, permanent elastic, cold applied and cold curing, one component, low modulus polyurethane elastomer (mastic) used for chalking and joint-sealing. Cures by reaction with ground and air moisture.
POLY TI PU is a moisture-curing, 1-component, polyurethanebased, non-sag elastomeric sealant. It is highly resilient and has excellent recovery characteristics. It can function under wide range of temperatures.
Single component moisture curing extended polyurethane liquid applied elastomeric membrane for waterproofing and protection of a wide range of surfaces.
Eagle Seal Silicone Sealant is single-component, room temperature acetoxy cured, and general purpose RTV sealant. It gives permanently elastic jointing compound, which is capable of accommodating up to 20 percent movement capability when properly applied. It offers excellent adhesion and weatherproof ability for general glazing and/ or sealing application.
Used to Reduce the level of flammability and increase the level of fire resistance of foam plastic and expanded polystyrene (PSB, EPS), extruded polystyrene (XPS), sprayed insulation (NPU), PIR plates, insulating foam sealants, assemble mats. The neat surface acquires a G1 flammability class.
Shower booth nanocoating is a unique product used for water diffusion and repulsion, as well as antilimescale, drop and contamination surface protection. This coating prevents limescale formation on any types of surfaces contacting with running water (e.g. shower booths, mirrors, glazed tile and etc.).
Shake the cylinder thoroughly for 1 minute before use. Apply a thin coat of the glue on surfaces previously cleaned of dust and dirt. It is enough to apply on one of surfaces. Hold the cylinder 10-20 cm away from the surface to be coated with the glue. Apply the glue to one surface, leave the material with the glue appliedfor 2-5 minutes, and then press it to the other surface.
Uni-Metal profiles for drywall and ceiling are manufactured in accordance with ASTM-C645 requirements. They are made from: Pre-galvanized steel complying with:
UNITECH Gypsum Boards are designed for wall and ceiling applications to meet most general construction needs. They are available in two different sizes. Gypsum boards have been manufactured to perform in accordance with ASTM C 36 and C 1396.
UNITECH Lead Sheet is generally the most cost-effective radiation shielding material to protect against the effects of gamma rays and x-rays. The properties of lead shielding which make it an excellent shielding material are its density, high atomic number, high level of stability, ease of fabrication and high degree of flexibility in application. Lead Sheets are formed in accordance with ASTM B-29,B-749, BS EN 12588:2006.
Fiber cement boards have taken the international market by storm. The strong portfolio of advantages make the product widely endorsed and appreciated by architects and customers worldwide; many of them are replacing plywood with fiber cement boards. Fiber cement boards have been used in some of the iconic buildings of our time as they save time, money and being aesthetically more beautiful in their appeal.
Decorative boards made from high density fiber cement board. The surface of the plate is coated with a set of protection materials including fluorine resin, UV single and multicolor coatings. The major coating materials have long service duration over different time spans. These boards can be used in the thermal insulation decoration of high-grade building‘ s interior walls.
AEG Electrical Power Tools comprise the following range: Hammers, drills, percussion drills and diamond drills, screwdrivers and battery tools, wall chasers, angle grinders and straight grinders, jig saws and circular saws and many more to address the most diverse applications in wood, metal, concrete and block. AEG also has its own range of innovative, high-quality accessories designed to perfectly complement AEG power tools.
Double abrasive disc 2x2 cutting and grinding 3 fiber glasses. Universal cutting disc 4x4
Turbo plus series combine the advantages of both continuous rim and segmented blades for the dry cutting of bricks, blocks, tiles, concrete and other masonry materials. It is recommended for work that requires fast free cutting of marble and granite and hard materials at a competitive cost.
Black max: pressure washers. Pressure Washers and Chainsaws
B+BTEC introduce a complete line of drilling systems, anchoring and saws. These machines are entirely designed, manufactured and assembled in its production facilities in the Netherlands and packed with new quality features. The B+BTEC R&D Division has developed a wide range of Bonds (the metal in which the diamond crystals are sintered) that are engineered for optimal cutting performance.
Diamond3® is the premier manufacturer of Professional Equipment, Tools & Accessories for Tile, Stone, Sanitary Ware, Masonry, Concrete & Brick. Its product line includes: Stainless Steel Cutting Equipment, Drilling & Grinding Equipment, Specialty Diamond Blades, Diamond Drill (Core) Bits and Grinding Wheels.
IRWIN TOOLS manufactures and distributes professional grade hand tools and power tool accessories worldwide for trade professionals who demand superior performance and durability on the job. IRWIN TOOLS’ brand portfolio features user-preferred category leaders such as IRWIN, Vise-Grip, Marathon, Quick-Grip, Speedbor, Strait-Line, Unibit, and Hanson.
Dynamik provide a complete range of Power generators, air compressors, bending and cutting machines.
Crepe paper coated with cured natural rubber adhesive. Ideal use for auto painting, outdoor painting, masking, packing, marking, bundling, splicing and general applications.
Also known as drywall joint tape is made from woven fiber to create a strong drywall joint. Ideal for joint finishing and patching.
Single component, moisture curing pu foam. Mainly used for sealing and insulation, filling of joints and cavities.
ASMACO gold b2 fire retatdant with cfc free propellants is a single component, moisture curing PU FOAM. Excellent fire retardant properties mainly used for sealing and insulation, filling of joints and cavities.
ASMACO gold b2 fire retatdant with cfc free propellants is a single component, moisture curing pu foam. Excellent fire retardant properties mainly used for sealing and insulation, filling of joints and cavities.
ASMACO 2500 is a single component acetic cure silicone sealant which vulcanizes on exposure to moisture in the air at room temperature, to produce a flexible elastomeric sealant.
PE-coated cloth Tape with a pressure sensitive rubber adhesive coating combined to provide a quality product. It is a good choice for bundling, heavy carton packing, general maintenance, pipe wrapping, carpet fixing, air-conditioning ducts seam and joint sealing etc.
High Temp Paint has a very good thermal resistance ranging from 400° - 600°C. The paint contains silicon resin along with high quality pigment. Most suitable for chimney, barbecues, engines and motorcycles, furnace, stove oven etc.
The durability and life of the chute depend on the quality of the plastic. Superchute® uses a high grade polyethlyene that is extremely resistant to abrasion and temperature extremes.
Koolmax Cooler
Zoom Tube is multi-functional bike audio and lighting accessory.
Are used in Odor eliminating as controlling misting System for internal buildings Garbage Chute trash room and external Garbage Compactors to eliminate the bad odors by using the Uni~Aroma odor eliminating liquid 1:300
Aveho odor removal technology is an engineered material consisting of micro-sized particles that capture and physically bind odor-causing compounds, or catalytically convert the odor molecules into non-odorous molecules. Impressive huh? For those of you technically-challenged folks out there, here’s a translation: aveho is really cool, really tiny stuff that makes stink go away forever!
Airocide® photocatalytic air purification system; developed to oxidize all airborne organic matter, even those too small to be filtered. Airocide's unique technology employs a reaction chamber packed with tiny Silicone tubes encrusted with a highly reactive titanium dioxide catalyst.
PolyTi Molding SeriesSolvent free, high modulus, polyurethane elastomer, providing excellent elasticity and high tear resistance properties with minimum shrinkage. Specialized elastomeric resin for:
Condensation tin cure molding RTV silicone rubber, tinbased silicone, also called condensation-cure silicone, are two-component materials which cure at room temperature the Eagle Seal RTV 1130 Silicon Mold making systems are flexible, high tear-strength rubbers. Tin cured silicone can be poured onto models or they can be made brush-able by adding a Thixotropic additive.
AKD 40 A is a two-part condensation cure silicone rubber. It is used for mould making where it is mixed with its catalyst and then poured around a pattern to create a flexible silicone mould.
Whenever oil has been spilt by accident, we can help fast and efficiently. Norsorex® APX combines all the advantages needed to guarantee a successful absorp on of hydrocarbons wherever it is needed.
GRAFYSORBER® is an innovative graphene-based material ideal for tackling environmental emergencies, including both historical and recent pollution.
Spill Tackle is proven to be the most economical and environmentally effective product for addressing motor oil, transformer (mineral) oil, anti-freeze, hydraulic oil, cooking oil, transmission fluid, brake fluid, paint spills and leaks indoors to pipeline and railcar crude oil mishaps in the environment.
